Ely/UK, 1. April 2018
SAMSON Materials Handling
Additional Samson® Truck Unloader for AS Silsteve at the Port of Sillamae, Estonia
The new mobile Samson® Material Feeder will receive bulk fertilizers and grain direct from 45 tonne tipping trucks and will discharge onto an ongoing SAMSON Shiploader at a peak output rate of 625 m³ per hour. This Material Feeder will complement the existing SAMSON Shiploader with twin Samson® Feeders which has been active at the […]
Read more
Atlanta/GA, USA, 1. April 2018
AUMUND Fördertechnik
AUMUND Corporation – Geoffrey Conroy hands over management to Simon Shipp
On 1st April 2018 Simon Shipp took over as General Manager of AUMUND Corporation USA, a subsidiary of AUMUND Fördertechnik GmbH based in Rheinberg, Germany. Simon Shipp has more than 25 years’ international experience in mechanical engineering, in particular with conveying equipment for bulk materials. At the same time, Geoffrey Conroy retired after 20 successful […]
Read more
Rheinberg, 1. April 2018
AUMUND Fördertechnik
AUMUND supplies patented HBI cooling lines for MIDREX Project at Cleveland Cliffs
In December 2018, AUMUND Fördertechnik GmbH, Germany, will dispatch an HBI evaporation cooler system to Cliffs, the operator of a Hot Briquetted Iron (HBI) Plant in Toledo, Ohio, USA. AUMUND’s patented technology consists of two FPB-K pan conveyors with centre distances of 72 m. Cleveland-Cliffs Inc. is constructing a new HBI works at this location […]
Read more
Gelsenkirchen, 1. March 2018
SCHADE Lagertechnik
After Limay I, SCHADE has now also supplied stockyard technology for Limay II Power Station
Two Tripper Cars with capacities of up to 1,540 tph and two SCHADE Semi-Portal Reclaimers with capacities of 770 tph were supplied by SCHADE Lagertechnik, Germany, to the new Limay II power plant in the Philippines in October 2016. Installation of the SCHADE machines started in August 2017 after sufficient construction work on the project […]
Read more
Gelsenkirchen, 1. March 2018
SCHADE Lagertechnik
SCHADE Lagertechnik successful in accreditation to ISO 9001
In January 2018 SCHADE Lagertechnik GmbH, Germany, achieved re-accreditation under the international quality management system ISO 9001, as well as under the environmental standard ISO 14001 and the occupational health and safety standard OHSAS 18001. The audit was carried out by TÜV Hessen and completes SCHADE’s transition to the newly-recognised 2015 standard for quality and […]
Read more
Gelsenkirchen, 1. March 2018
SCHADE Lagertechnik
Baosteel shows confidence in SCHADE solutions Four More Semi-Portal Reclaimers for China
In October 2017, SCHADE Lagertechnik GmbH won a further order from Baosteel Iron & Steel Company Ltd., Shanghai, this time for an additional supply of four Semi-Portal Reclaimers. These machines have a rail span of around 38 m and a capacity of 1,500 tph, and are expected to be delivered in November of this year. […]
Read more
