AUMUND Conversion Case Study: PU Coating for Bucket Elevator Corrosion Protection
12. February 2022
Uncategorized

Protecting Bucket Elevators Against Corrosion: A Customised PU Coating Conversion
Chloride-containing materials. Recurring corrosion. A new approach to protecting critical equipment. In the cement industry, aggressive bulk materials can significantly affect the service life of conveying equipment. To address recurring corrosion in a Double Chain Bucket Elevator, AUMUND Fördertechnik developed a customised Conversion solution using polyurethane (PU) coating. Successfully tested under real operating conditions, the solution demonstrates how targeted engineering can help protect existing equipment and reduce future maintenance requirements.
Project Facts & Details
| Industry | Cement |
| Application | Clinker conveying |
| Equipment | Double Chain Bucket Elevator |
| Challenge | Corrosion caused by chloride-containing materials |
| Conversion solution | PU-coated elevator casings |
| Validation | Six-month field test under actual operating conditions |
| Services | Engineering, Conversion, component supply and on-site installation |
The Challenge: When Conveyed Materials Cause CorrosionIn cement production, the chemical composition of conveyed materials can create demanding conditions for mechanical equipment. Chloride-containing materials, in particular, can contribute to severe corrosion of steel components, affecting equipment reliability and increasing maintenance requirements. Bucket elevator casings are particularly affected as they are continuously exposed to the conveyed material during operation. Under highly corrosive conditions, conventional protective measures do not provide sufficient long-term protection. In one cement industry application, recurring corrosion significantly limited the service life of the elevator casings. Even galvanised steel components had to be replaced after approximately five to six years. Alternative materials and conventional protection methods offered no technically or economically satisfactory solution. The challenge was to protect the existing equipment more effectively without compromising its functionality. |
Corroded bucket elevator casing before Conversion.
|
PU-coated casing components.
|
The AUMUND Conversion Solution: A Protective Barrier Against CorrosionRather than relying on conventional replacement materials, AUMUND Fördertechnik developed a customised Conversion concept based on polyurethane (PU) coating. Applied to the internal surfaces of the bucket elevator casings, the coating forms a protective barrier between the steel structure and the aggressive conveyed material. The innovative aspect was not the coating technology itself, but its application to this specific challenge in bulk material handling. Working with a specialised coating partner, AUMUND developed an application-specific solution for the existing bucket elevator. Before full implementation, PU-coated test plates were installed inside the casings to assess their performance under actual operating conditions. |
After six months, the coated test components showed no visible signs of wear. The successful field trial provided the basis for implementing the solution across the affected casing sections. Following the test phase, AUMUND Fördertechnik developed the Conversion concept into a complete solution, taking responsibility for engineering and supplying the PU-coated casings.
The internal protective coating helps shield the steel surfaces from direct exposure to the chloride-containing material.
From Engineering to On-Site ImplementationAUMUND Group Field Service supported the project from the initial planning stages through to on-site execution. Installation concepts, lifting operations, schedules and resources were planned in detail to meet stringent health, safety and environmental requirements. Close coordination between AUMUND Fördertechnik and AUMUND Group Field Service brought engineering, component supply and on-site installation together in one coordinated approach. The project demonstrates how targeted Conversion engineering can address material-induced corrosion while supporting the long-term reliability of existing equipment. |
PU-coated casings following Conversion.
|
Customer Benefits of the PU Coating Conversion
| TARGETED CORROSION PROTECTION
PU coating helps protect steel surfaces against corrosive influences from chloride-containing materials.
|
VALIDATED UNDER REAL CONDITIONS
Six months of field testing showed no visible wear on the coated test components.
|
| POTENTIAL FOR LONGER SERVICE LIFE
Reduced direct exposure to corrosive material may extend the service life of affected components.
|
REDUCED MAINTENANCE REQUIREMENTS
Improved protection can help reduce recurring casing replacements and maintenance interventions.
|
| CUSTOMISED CONVERSION ENGINEERING
The solution was tailored to the operating conditions and technical requirements of the existing equipment.
|
ENGINEERING & FIELD SERVICE
Technical development, component supply and on-site installation from one coordinated source.
|
|
CONVERSION EXPERTISE · AUMUND GROUP
A Targeted Conversion with Long-Term PotentialTargeted Conversion solutions address challenges that conventional replacement approaches cannot resolve. The successful PU coating field trial demonstrates the potential of application-specific engineering for demanding clinker conveying operations. What this solution demonstrates:
|
![]() |
Facing recurring corrosion, premature wear or changing operating conditions? Talk to our Conversion specialists about a tailored solution for your equipment.
|
AUMUND GROUP CONVERSION
Conversion engineering and equipment modernisation
Email: conversion@aumund.com Telephone: +49 2843 72 270 |
Contact
If we can help you with any further information, please use the contact form to get in touch.
You will receive an immediate automated acknowledgement, and we will respond to your enquiry as soon as possible.
Many thanks
AUMUND. SCHADE. SAMSON.
